40427 Media Handler MDH: Please remove all plates from the Trendsetter bay A load sequence was cancelled, but the sensors in the bay indicate that there are still plates in the bay. These plates must be removed so that they do not interfere with subsequent loads. This error will only come up if the Preloader is in place in front of the Trendsetter. There are plates in the Trendsetter bay that must be removed. Move the Preloader out of the way, remove the plates from the bay, then position the Preloader back in front of the Trendsetter. Selecte RESUME to continue. This error is reported. Plate(s) detected in the bay after a load is cancelled. 23-May-2002 ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:23:26 2008 PST